WingCell®
Pumps
One patented pump design in three versions. The pumping performance is the same. Materials, surfaces and documentation follow the requirements of your industry.
WingCell Chemical
A robust, cost-effective version for chemical processes, without hygienic design requirements.
- Aluminium coupling housing
- Chemically resistant contact materials: AISI 316L and Duplex, FEP and PEEK-TX
- No rubber in product contact and no crevices
- Standard Siemens SIMOTICS S-1FT2 2.2 kW servo motor
WingCell Food
Hygienic design inside and out, with FDA and EU 1935/2004 approved contact materials.
- Hygienic design inside and out
- Contact materials approved to FDA and EU 1935/2004
- CIP compatible and fully drainable in horizontal and vertical installation
- Standard Siemens SIMOTICS S-1FT2 2.2 kW servo motor
WingCell Pharma
Polished surfaces, third-party certification to 3-A and EHEDG, and a hygienic stainless steel motor.
Available from August 2027
- Polished or electropolished product contact surfaces
- Third-party certification to 3-A and EHEDG
- Steam sterilisation possible: all parts stable up to approx. 150 °C
- Hygienic Siemens servo motor in stainless steel, 3-A approved
Technical data
Standard version. Other motors and DN25 connection types on request.
| Flow | 100–4000 l/h |
|---|---|
| Pressure | 0–10 barG |
| Pulsation | Approx. ±6 % depending on pressure (eight chambers emptied in sequence) |
| Suction | High vacuum, above 95 %, without cavitation |
| Temperature | All parts stable up to approx. 150 °C; steam disinfection possible |
| Dry running | Accepted for shorter periods |
| Connections | DN25, DIN 11864-3 clamp, 29 × 1.5 mm. All other DN25 connection types optional |
| Motor | Siemens SIMOTICS S-1FT2, 1FT2206, IP67, 2.2 kW. Other motors on request |
| Dimensions | 534 × 208 × 188 mm incl. motor |
| Weight | 21 kg incl. motor |
| Contact materials | Pickled or electropolished AISI 316L and Duplex, FEP and PEEK-TX |
| Mounting | Bracket on the bearing housing, rotatable in steps of 90°, M10 or M12 screws |
Why WingCell?
Low pulsation, no cavitation
Eight chambers are emptied in sequence, and fluid velocities stay low everywhere in the pump.
Compact
53 cm long and 21 kg including motor. Watertight, so no motor shield is needed.
Easy maintenance
The bracket sits on the bearing housing, so pump and motor can be serviced in place. No oil, no gears, no special tools.
Chemically resistant
No rubber in product contact and no crevices in the design. No microplastics released during operation.
Hygienic design in accordance with
- EHEDG Guidelines doc. 10, 17 and 18
- DIN 11864-3 and DIN 11864-1 (connections)
- ASME BPE-2016
- 3-A Sanitary Standard for Centrifugal Pumps and Positive Rotary Pumps
- 3-A Sanitary Standard for Sanitary Fittings, number 63-04
- ANSI/3-A 00-01-2018 “3-A Sanitary Standard for General Requirements”
- DS/EN 1672-2:2020, Food processing machinery – Hygiene and cleanability requirements
- ISO 14159, Safety of machinery – Hygiene requirements for the design of machinery
Talk to an engineer.
Tell us about your fluid, flow and pressure, and we will tell you honestly whether WingCell is the right pump for the job.
